Shogun Motorsports Suzuki TL1000R CUT Frame Slider - Manual

Suzuki TL1000R CUT Frame Slider Installation
Instructions
Part Numbers: 750-5119, 750-5110
MADE IN THE USA!
Carefully read instructions in their entirety before the install
Professional installation is recommended. Always use proper safety measures during the install of this
product. Do not try to install this product without proper tools, recently calibrated torque wrench,
correct torque specifications from factory service manual, safety goggles and gloves. The motorcycle
must be in a fixed secure position before the install process begins. DO NOT remove both engine studs
at the same time.
Shogun is not responsible for any part of your motorcycle for any reason. Precisely
measure location of cut and if in doubt at any point please call us before the install process has begun.
Some photos may be used for illustration examples only.
Replacement Parts List: Left Side Components (as if you were sitting on the bike)
QTY
Price each Part Numbers Descriptions
1
$20.00 99-FS-750-5119-L Black Left Side Puck
1 $20.00 99-FS-750-5110-L White Left Side Puck
1 $20.00 99-OF-750-5110-B Left Side Offset Black Anodized
1 $2.00 99-HB-SH10150050 Socket Cap 10 X 1.5 X 50 (Holds puck to offset)
1 $3.50 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 (Goes through the Offset into
the Frame) Main Engine Stud
Replacement Parts List: Right Side Components (as if you were sitting on the bike)
1
$20.00 99-FS-750-5119-R Black Right Side Puck
1 $20.00 99-FS-750-5110-R White Right Side Puck
1 $20.00 99-OF-750-5110-B Right Side Offset Black Anodized
1 $2.00 99-HB-SH10150050 Socket Cap 10 X 1.5 X 50 (Holds puck to offset)
1 $3.50 99-HB-SH10125080 Socket Cap 10 X 1.25 X 80 Main Engine Stud
Frame Sliders: Left slider is longer than right. Offsets are the same.
Some photos may be used for illustration examples only.
Installation Steps:
1.
Remove left side Body work and forward engine stud (Number 15 as seen in illustration)