SEVERIN KS 9888 - Manual (Page 13)

For each zone, the temperature range can be set between 4 °C and 18°C (40 °F and 65 °F). ●
The unit is activated by connecting it to the mains. It is only switched off completely when the plug is
removed from the wall socket. The actual temperature inside the cabinet is shown in the temperature
display.
The temperature settings for both zones can be adjusted using the -button (upper zone) and
the -button (lower zone). The temperature can be changed in 1-degree steps (°C or °F). During the
adjustment phase, the display blinks.
The indicator lamps next to the temperature levels for RED, WHITE or SPARKLING show the
temperature setting suitable for that particular wine: RED for red wine, WHITE for white wine, and
SPARKLING for sparkling wine or champagne.
The temperature display format can be changed by pressing °F/°C. The selected format is indicated
by the active light next to the appropriate temperature symbol.
The interior light is switched on and off by pressing the
button.
Changing the interior light bulb
Switch off the interior light. –
Remove the plug from the wall socket. –
Use a suitable screwdriver to remove the screw from –
the lamp cover (1).
Take off the lamp cover (1) by slightly pulling down its
–
lower end.
Remove the defective bulb (2) from its housing (3) and
–
fit a new 10W-bulb (max. 15 W) of the same size and shape.
Slide the cover (1) back into position, replace the screw and tighten it.
–
Storing wine
The temperature in the cabinet largely depends on factors such as the ambient temperature, the –
setting and the number of wine bottles stored. If the ambient temperature falls below 20 or
exceeds 25°C, the maximum achievable storage temperature inside the unit can vary accordingly.
The following temperatures are suitable for various wines: –
Red: 15-18°C / 60-65°F
Dry/white: 10-15°C / 50-59°F
Sparkling/champagne: 7- 9°C / 45-49°F
The specified temperature range may vary up or down as a result of outside factors such as the –
weather, the interior light being switched on, or the position of the bottles stored in the cabinet
(top, bottom or middle)..
The vertical space between the storage racks can be modified to accommodate different-sized
–
bottles by selecting the appropriate guide rails for each rack.
Always ensure that the door is properly closed and that the seal is not obstructed by bottles
–
stored inside the cabinet.
Door lock
The door lock can be used to protect the cabinet against unauthorised use.
We recommend that you remove the second key from the holder and store it in a safe place. This will
also protect the housing against scratching caused by the second key dangling from the key holder.
13