Veris Technologies Quad 2800 Soil EC Mapping System - Operating Instructions - Manual

OM17-Quad2800
1-1
Quad 2800
Soil EC Mapping System
Table of Contents
Section 1
1-2 Warranty & Safety
Section 2
2-1 Electronics Overview and Set-up: EC Surveyor
2-3 Electronics Overview and Set-up: DataLogger
2-4 Software Set-up: SoilViewer
Section 3
3-1 Implement Overview and Set-up
3-2 Additional Assembly Instructions
Section 4
4-1 Field Operations
—EC Surveyor
4-2 Field Operations —EC Surveyor with DataLogger
4-4 Field Operations —EC Surveyor with SoilViewer software
4-5 Field Operations--Implement
Section 5
5-1 Troubleshooting
5-2 SoilViewer Troubleshooting
Section 6
Maintenance and Service Procedures
6-1 #1. EC Surveyor signal testing
6-2 #2. Testing electrical continuity
6-4 #3. Diagnosing and correcting EC signal problems
6-10 #4. Spring plunger testing and replacement
6-12 #5. Diagnosing GPS-related problems
6-16 #6. Firmware updates and SD card formatting
6-19 #7. Implement lubrication
6-19 #8. Maintenance
6-20 #9. Micro-chip replacement
Operating Instructions