Veris Industries TP SERIES Datasheet - Manual

TE
MPERA
TURE
VERIS INDUSTRIES
800.354.8556 +1 503.598.4564 www.veris.com
TP
Durable Device for Temperature
Monitoring
Flush Mount
Temperature Sensors
TP SERIES
FEATURES
● Wiring is potted...resistant to moisture
● Stainless steel construction...durable
● Mounts to standard duplex wall mount box...easy installation
●
Easy to clean
● Available with linitemp, RTD, or thermistors...application flexibility
DESCRIPTION
TP flush mounted temperature sensors are designed to monitor the temperature
of the air in areas where sensor durability and security are needed. They are ideal
for spaces where moisture and vapor are concerns. The back of the TP is insulated
to reduce interior wall temperature influence. The TP is for indoor use only, and it is
warranted for a period of five years.
SPECIFICATIONS
Wiring 22 AWG; 2-wire: RTD Thermistor, 4-20mA; 3-wire: Voltage output models
Housing Brushed 430 stainless steel
Linitemp:
Input Power 5 to 30VDC
Output 1µA/°C or 10mV/°C
Operating Temperature -25° to 105°C (-13° to 221°F)
Resistive:
RTD/Thermistor See table, facing page
Accuracy:
Calibration Error 1.5°C (2.7°F) typical; 2.5°C (4.5°F) max. at 25°C (77°F)*
Error over Temperature 1.8°C (3.24°F) typical; 3.0°C (5.4°F) max. over 0° to 70°C (32° to 158°F) range;
2.0°C (3.6°F) typical, 3.5°C (6.3°F) max. over -25° to 105°C (-13° to 221°F) range
*Room temperature error documented on each unit.
HQ0003998.A 01131