Warrior 510 BUMPER WITH HITCH (1987 – 1996 Jeep YJ Wrangler) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
BUMPER WITH HITCH
INSTALLATION INSTRUCTIONS
WAR 510
1. Remove stock “Bumperettes”. Retain bolts, washers, and nuts for installing your
new Bumper.
2. Install Bumper using bolts removed in #1 above. Tighten to manufacturer’s
suggested torque. Be sure there is a washer under the bolt head and between the
nut and the frame. (Washers are not provided)
3. The two bolts and spacers provided are to be used on the bottom of the Bumper.
Tighten bolts to 50 ft. lbs. torque.
4. ENJOY YOUR NEW BUMPER!
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS