M-AUDIO NRV10 - Manual (Page 3)

NRV10 User Guide
|
3
Introduction
1
C
ongratulations on your purchase of the M-Audio NRV10 FireWire mixer. The NRV10 is a high-quality analog mixer with
an integrated 10-in/10-out FireWire digital audio interface. The NRV10’s FireWire interface allows you to record up to
ten channels of audio directly into your computer-based DAW, as well as bring audio from your DAW back to its analog mixer
channels. Its low-latency FireWire drivers support high-resolution sample rates of up to 96kHz and bit-depths of up to 24 bits, and
its compact footprint makes it ideal for the home and project studio, or for live use.
The NRV10 has been designed with a host of professional features, including XLR inputs with great sounding microphone preamps
and switchable phantom power, flexible headphone monitoring capabilities, and an integrated digital effects processor for adding
reverb, delay, chorus and other effects to your mix. The NRV10 is also equipped with eight line-level inputs, two mono effects
sends, two stereo effects returns, three-band EQ on each input channel, and a separate control room output with its own
dedicated fader.
What’s in the Box
2
Before you begin setting up your NRV10 mixer, please check that the following equipment was included in your box:
< M-Audio NRV10
< Pro Tools M-Powered Demo CD
< 6-Pin-to-6-Pin FireWire Cable
< 6-Pin-to-4-Pin FireWire Cable
< External Power Supply
< M-Audio FireWire Series CD-ROM (includes drivers, documentation, and NRV10 interFX software)
< Printed Quick Start Guide