M-AUDIO NRV10 - Manual (Page 5)

NRV10 User Guide
|
5
Features and Technical Specifications
4
< Eight 1/4” balanced TRS line inputs
< Five balanced XLR mic inputs
< Integrated digital effects processor with 256 settings
< Two mono effects sends
< Two stereo effects returns
< Balanced XLR and 1/4” main outputs
< Headphone output with flexible source assignment
< Full stand-alone mixer operation
System Requirements
5
Important: The NRV10 is supported under Windows XP with Service Pack 2 or later. It is not supported under Windows 2000,
Windows 98 or Windows Me. Visit the Windows update web pages to make certain you have the most current updates and fixes
supplied by Microsoft.
On the Mac, the NRV10 is supported under Mac OS X version 10.3.9 as well as 10.4.7 or later. Apple Macintosh operating system
versions earlier than Mac OS X 10.3.9 are not supported.
Windows*
< Pentium III – 800MHz or higher
(may be higher for laptops)
< 512 MB RAM
< Windows XP (SP2)
< DirectX 9.0c or higher
< Available FireWire port or FireWire expansion
card
Mac OS*
< Macintosh G3** 800MHz or G4** 733MHz
higher (may be higher for laptops)
< 512 MB RAM
< Mac OS X 10.3.9 / 10.4.7
< Available FireWire port
*G3/G4 accelerator cards not supported
*Please check the minimum system requirements for your software, as they may be greater than the above specifications.
**G3/G4 accelerator cards are not supported.
Before you begin the driver or hardware installation, please confirm that your computer meets or exceeds all of the specifications
listed above. If your computer does not meet all of these requirements, the NRV10 may not function properly (or at all) with it.
We also recommend that you check the minimum requirements of your DAW software as they may be higher.