Atdec Telehook TH-PT24 Technical specs - Manual

Technical Specifications TH-PT24
Projector | Suspended Ceiling Tile 24"
General Features
Dimensions
603.25mm (23.75”)
28.57mm
(1.13”)
603.25mm
(23.75”)
191.48mm (23.75”)
127mm (5”)
Ø6.40mm ( 0.25”)
152.40mm
(6”)
70mm (2.75”)
84mm
(3.30”)
24” x 24” replacement ceiling tile, suitable for most suspended tile grids including 600 x 600mm or 1200 x 600mm.
Maximum weight capacity
50lbs (22.7kg)
Projector Mount Compatibility
1.5” NP T pipe adaptor
Telehook Projector Mounts TH-WH-P J-C M and TH-WH-PJ-FM
Cable Management
2 ‘push out’ panels for electrical sockets and cabling
Hardware
6.1m (20ft) Ø1.2mm (16-gauge) support wire
3m (10ft) of stainless steel safet y cable
Turnbuckles allow for easy installation
Fixing hardware for solid concrete and wooden joist
Finish
White gloss powder coat
Warranty
10 years limited
Ø7mm ( 0.28”)
58mm
(2.28”)
111.70mm
(4.40”)
25.4mm (1”)
60mm (2.36”)
95.25mm
(3.75”)
Ø4mm ( 0.16”)
167mm
(6.57”)
Ø4.75x8mm
( 0.18”x0.31”)
49mm (1.93”)
60mm
(2.36”)
ATDEC POLE MOUNT
243.18mm
(9.57”)
50.8mm
(2”)
39.5mm
(1.55”)
86mm
(3.38”)
61.5mm
(2.42”)
NPT PIPE ADAPTER
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 06.03.12©