Milton CAT D100-6_S 100 kW Sub Base Tank - Manual

A T T A C H M E N T S
LEHE0406-01 (07/13)
FEATURES DESCRIPTION
UL listed for the United States UL142 and
•
Canada ULC–S601
Compliant with NFPA 30, 37, and 110 and B139-09
•
standards
Welded heavy steel gauge construction with a
•
containment basin sized as a minimum 110% of
the tank
Gloss black polyester triglycidyl isocyanurate
•
(TGIC) powder coating.
Dedicated external customer interface area with
•
access to the 4” (101.6mm) Fuel fill, visual level
gauge, normal and emergency vents
Rear electrical stub-up area with removable
•
access panel
Removable engine supply and return dip tubes
•
Two additional 1” (25.4mm) ports for customer
•
use
Tanks are rated to safely support the weight of
•
the generator
8 gal (30.3L) drip pan for oil and coolant (for
•
generator sets up to 60ekW only)
Standard NPT tank fittings
•
UL listed emergency vents sized as per UL
•
Standards 3” (76.2mm), 4” (101.6mm) and 5”
(127mm) NPT
Normal atmospheric vent 1-1/4” (31.75mm)
•
Top mounted fuel level sender with control panel
•
alarms
Top mounted leak detection switch
•
Lockable fuel fill cap, 4” (101.6mm) NPT
•
Dual wall, secondary containment
•
Pressure tested to UL requirements
•
Fuel tank mounts directly below generator Skid
•
Base
Modular tank design is compatible with all
•
factory units Open and Enclosed.
OPTIONS
Emergency vent and normal vent extension kits
•
12 ft (3.66m)
5 gal (18.9 L ) spill containment
•
Overfill prevention valve
•
Tank riser to allow for visual secondary
•
containment leak inspection
C4.4 and C6.6
Sub-Base Fuel Tanks
Newberry
Diesel Generator Set
40 – 175 kW 60 Hz
Image shown may not reflect actual package.