Velleman SLKB05 - Manual

Information sheet
Velleman ® 1/6 Last update: 11/10/2010
Setting a new combination
1 rotating disc (4x)
2 marker
3 adjusting disc
4 toothed pin
5 light button
To set your own personal code, follow the instructions below:
1. Rotate the rotating discs [1] until the opening sequence is aligned with the
marker [2].
Note: A new lock code is factory preset at 0-0-0-0.
2. Pull out the toothed pin [4].
3. Rotate the adjusting disc [3] counter-clockwise until it stops.
4. Select a new sequence by rotating the disc [1].
5. Rotate the adjusting disc [3] clockwise until it stops.
6. Insert the toothed pin [4] and test the new sequence before using the lock.
Replacing batteries
1 screwdriver (not incl.)
2 battery cover
3 battery (4x LR1130)
4 lock housing
The lock contains a blue LED light which is powered by 4 batteries (type LR1130). To
replace the batteries, follow the instructions below:
1. Use a suitable screwdriver [1] to open the battery cover [2].
2. Remove the old batteries [3] and dispose of them in accordance with local
regulations. Keep batteries away from children.
3. Insert new batteries as indicated in the drawing.
4. Close the battery cover [2] and tighten the screw firmly.