Velleman KSR9 - Manual

KSR9 - 1 - VELLEMAN
KSR9 – “BOTBALL” KIT
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the KSR9! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
The KSR9 requires 2 x 1.5V AA batteries (not incl.) and 1 x 9V battery (not incl.); the remote control requires 4 x
1.5V AA batteries (not incl.). Apart from the batteries, you will also need a pair of long-nose pliers, a diagonal cutter
and a screwdriver.
2. Remote Control
a.
Introduction
This is a 4-channel IR remote control used to control one KSR9. Line up to 4 KSR9’s by choosing a different channel
for each Botball.
b.
Parts List
P1
Battery terminal #1 x 2 P2 Battery terminal #2 x 2 P3 Battery terminal #3 x 2
P4 Tapping screw (2.3 x 7mm) x 4 P6 Finished PCB
P5 Tapping screw (2.6 x 7mm) x 4