Velleman KNS3 User Manual

Kns3 – robomech

Advertising
background image

KNS3

- 1 -

VELLEMAN

KNS3 – ROBOMECH

1. Introduction & Characteristics

Dispose of this product in accordance with Local and National Disposal Regulations.


Thank you for buying the KNS3 ! Read this manual carefully before bringing the device into use.

• Easy to build, no glue or soldering required.
• Dislodge pre-cut pieces when you need them, not before. Sand any jagged edges before use (sandpaper included).
• The kit is powered by 2 AA-batteries (not included).

The kits of the KNS-series are supplied with prepunched boards, a gearbox, gears, shafts, a switch, a motor, a
battery holder and all necessary parts.

2. Parts List

Part n° Quant.

Description

Part n° Quant.

Description

1

1

gearbox

16

18

self-tapping screw (2 x 4mm)

2

1

motor 3Vdc

17

2

self-tapping screw (3 x 16mm)

3

1

pinion gear 8T

18

2

screw

4

1

gear 40T/0T (white)

19

2

rivet

5

1

gear 40T/10T (red)

20

2

nylon cap

6

1

gear 40T/10T (green)

21

2

LED with wires

7

1

face gear 36T/10T (white)

22

1

wire with terminal (yellow)

8

1

metal shaft (3 x 52mm)

23

1

wire with terminal (green)

9

1

metal shaft (2 x 40mm)

24

1

battery holder

10

2

nylon pad

25

1

slide switch with wire

11

2

nylon post (H : 3mm)

26

1

PVC tube (small)

12

2

nylon connector

27

2

PVC tube (large)

13

8

nylon pad Ø8mm

28

2

metal foot (U-shaped)

14

6

washer

29

2

fixing plate (large)

15

2

nut M2

30

1

fixing plate (small)


Fig.1

Advertising