Sony NV-U83 - Manual (Page 7)

7
On the positioning system
(POSITION plus)
(NV-U93T/U83 only)
The system has a function that allows the current car
position to be correctly displayed even at locations
where the GPS signal is temporarily interrupted or
poorly received, as when going under an overpass.
To activate this function, do the following:
– Attach the unit to the cradle.
– Drive for a while in an area where the GPS
signal is clearly received.
The positioning system will become ready for
operation after you have driven a little with the unit
on.
Notes
• The accuracy of this function may deteriorate if the
unit is installed near a heated or heat-reflecting
windscreen.
• Depending on the conditions, the current car
position or the movement may not be accurately
displayed. This, however, will be corrected as soon
as the GPS signal reception resumes.
• This function is available only during route guidance.
IMPORTANT NOTICE for the
Bluetooth function!
(NV-U93T/U83 only)
Safe and efficient use
Changes or modifications to this unit not expressly
approved by Sony may void the user’s authority to
operate the equipment.
Please check for exceptions, due to national
requirement or limitations, in usage of Bluetooth
equipment before using this product.
Driving
Check the laws and regulations on the use of mobile
(cellular) phones and hands-free equipment in the
areas where you drive.
Always give full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
Radio frequency exposure
RF signals may affect improperly installed or
inadequately shielded electronic systems in cars,
such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed
control systems or air bag systems. For installation
or service of this device, please consult with the
manufacturer or its representative of your car. Faulty
installation or service may be dangerous and may
invalidate any warranty that may apply to this
device.
Consult with the manufacturer of your car to ensure
that the use of your mobile (cellular) phone in the
car will not affect its electronic system.
Check regularly that all wireless device equipment
in your car is mounted and operating properly.
Connecting to other devices
When connecting to any other device, please read its
user guide for detailed safety instructions.
Emergency calls
This Bluetooth car hands-free and the electronic
device connected to the hands-free operate using
radio signals, mobile (cellular) phone, and landline
networks as well as user-programmed function,
which cannot guarantee connection under all
conditions. Therefore do not rely solely upon any
electronic device for essential communications
(such as medical emergencies).
Remember, in order to make or receive calls, the
hands-free and the electronic device connected to
the hands-free must be switched on in a service area
with adequate cellular signal strength.
Emergency calls may not be possible on all mobile
(cellular) phone networks or when certain network
services and/or phone features are in use.
Check with your local service provider.
On the software
Read the “END-USER LICENSE AGREEMENT”
carefully before use.