Toner Cable CM-8 Cable Mapper & Toner - Manual

Specifications Subject To Change Without Notice Rev 11-13 ©Toner Cable Equipment, Inc.
CM-8
Cable Mapper & Toner
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Pocket Toner Does 8 Different Cables
At One Time
With eight separate and unique indentifiers, you are now
able to easily tone out up to eight separate coax cables
at one time. No more running back and forth to change
the identifier on the cable end.
For use on coax cables for CATV, satellite installations,
audio video equipment, CCTV and security & alarm
installations. The CM-8 coax cable mapper & toner is
designed to quickly find and identify multiple cables and
easily map runs to and from a central cable bundle. Ideal
for homerun installations.
Features
• Eight numbered & color coded cable identifiers
#1 White, #2 Red, #3 Black, #4 Blue,
#5 Green, #6 Yellow, #7 Purple & #8 Brown
• Two alligator clip sets
- 1x F-Male coax adapter
- 1x F-Female coax adapter
• Built-in toner generator
• Auto power off 30 minutes in “Tone” mode
• Test for opens and shorts
• Auto power off 12 seconds after Pass/Fail
results
• Maximum cable length for testing 5,000 feet
• Powered by two 3V CR2032 batteries
• Low battery warning light
• Maximum DC cable resistance100 Ohms
• Live voltage detection
Kit Contains
• Cable Mapper & Toner
• 8 Cable Identifiers (Numbered & Color Coded)
• 2 Alligator Clip Sets
• Cordura Case
• Instruction Sheet