Toner Cable RTC 360 Cable Pro RTC 360 Crimp Tool - Manual

Cable Pro RTC 360 and F-Conn Connectors
Telephone: Nationwide: Fax: E-mail: Internet:
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
12/00
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Cable Pro RTC 360
A True 360°
Round Crimp
• High Quality Stainless Steel Tool
• Makes Standard F-Connector
Universal (Works with F-Conn,
Gilbert, LRC, Pyramid and others)
• 360° Electrical Integrity
• Water-tight Crimp
(Passes SCTE-IPS #TP013)
• Greater Pull-out Strength
(Exceeds minimum pull out of
SCTE-IPS #TP-400)
• Soon Available for RG7 & 11
Cable. Call for details
• Reduces Radiation Leakage
• Also Available with Ratchet
Mechanism
• By reducing the outside and inside diameters by an average of .72 thousandths we achieve the same
reduction in area as you get using a .360 Hex Crimp Tool and a universal connector. This reduction
in area is for the full 360° circumference of the connector (NOT JUST 6 POINTS). The results are an
excellent water and radiation seal while providing a strong connection with improved electrical proper-
ties that maintains a 75 ohm impedance.
• The RTC 360 Crimp Tool is made of hardened stainless steel and utilizes a die to extrude the F-
Fitting into a 360° true round tapered crimp.
• RG-6 cable uses a .342 I.D. connector with a .370 to .375 O.D. This crimp is universal from quad-
shield down to 60% braid.
• RG-59 cable uses a .312 I.D. connector with a .370 to .375 O.D. (Ringed connectors work very well).
This crimp is universal from quad-shield down to 53% braid.
See back for connector ordering information.