Shindy 17-863 Digital Tachometer User Manual

Digital gauge

Advertising
background image

DIGITAL GAUGE

Digital Tachometer Part No. 17-863

OWNERS MANUAL

*

Before installing the digital tachometer, car

efully read these instructions.

USES
This tachometer is designed for use on motorcycles, cars, karts, snowmobiles, etc.

Features

-

Suitable for 2- and 4-cycle engin

es with any number of cylinders.

-

Engine speed

d

isplays the current engine speed. (Does not work on the point ignition system)

Engine speed measuring range by cycle/cylinder is shown below.

Cycle

Cylinder

No. of ignition
per crank rotation

Engine speed
range (RPM)

2

1

1

100- 19990

2

2

2

100- 15000

2

3

100- 10000

2

4

100-7500

-Auto Power Off

*Automatically switches off 10 seconds after the external power supply is shut off. Display can be

recalled by pressing the "MODE" or "SET" button, or repowering.

*If the tachometer is not connected to the external battery, it won't display continuously due to this

auto off function. In order to continuously show the display, connect the device to a 3V or higher

voltage dry-cell battery. (9V or higher voltage power supply necessary for LED lighting.)

-Maximum engine speed records and displays the maximum engine speed. (This speed can be reset.)
-Clock displays the time in the 24-hour system.
-Elapsed time totals and displays the length of time that the engine has been running.

*This function is useful for remembering when to change the oil or when to perform regular

maintenance work. (This function cannot be reset without removing the internal battery.)

-LED lighting allows the display to be read in the dark. LED lights up only when the gauge is connected to
vehicle's battery or a 9V dry-cell battery purchased separately.
-Auto display switching automatically displays the tachometer reading when the ignition is switched on and
displays the time when the ignition is switched off. (This function is available only if the red lead of the EL
backlight cord is connected to the lead that receives current when the ignition is switched on.)
-Sturdy and water-resistant construction is made to withstand everyday use in any weather condition.

* Tachometer is not completely waterproof. Do not submerge in water or expose to pressurized water.

-Internal battery is a chargeable lithium battery(ML2430/3V) equipped inside the gauge, but is not
exchangeable. If the tachometer is connected to the vehicle's battery and the ignition is switched on, the
tachometer automatically begins drawing power from the vehicle's battery in order to conserve the internal
battery. While being connected to vehicle's battery or a dry-cell battery purchased separately, internal
battery is automatically charged. If the internal battery has been fully used, the cycle/cylinder settings,
elapsed time, maximum engine speed reading and clock will be reset. If this happens, the internal battery
should be charged for about 10 hours.

Cycle

Cylinder

No. of ignition
per crank rotation

Engine speed
range (RPM)

4

1

1/2

100- 19990

4

2

1

100- 19990

4

3

100- 19990

4

4

2

100- 15000

4

5

100- 12000

4

6

100- 10000

4

8

100- 7500

Advertising