Baron Chrome Shop_AXLE NUT_FORK COVERS - CHROME User Manual
Ba-7800-xx – chrome axle nut covers
7401 Slater Ave. ● Huntington Beach, CA 92647● (760) 731-1200 – Ph. ● (760) 731-1284 – Fax ● www.baronscustom.com ● [email protected]
Revision 5.0 (6/17/2009)
BA-7800-xx – CHROME AXLE NUT COVERS
INCLUDED IN THE KIT:
(2) Axle Nut Covers, chrome
(4) M6x10 set screws
(1) Honda bolt kit
INSTRUCTIONS:
1. Slide your new Baron Axle Nut Covers into position on the bottom of
each front fork leg until seated.
2. Rotate as needed for best coverage. A cut out has been provided for
speedometer drive cable clearance on models so equipped.
3. Tighten (2) set screws to secure.
4. Honda models require our included BA-7800-01, Bolt Kit to replace
stock pinch bolts (2 per fork leg).
CAUTION! We Strongly recommend that a qualified
technician install this kit if you do not completely
understand the instructions prior to the install.
Our install guides provide a basic outline on the proper installation of our products. Further tuning
and/or fitment may be required. Baron bears no responsibility on installation costs associated with this
product.
© 2009 Baron Custom Accessories