Electronics 179-AC User Manual

Model 179 magnavalve

Advertising
background image

* MODEL 179 MagnaValve *

ELECTRONICS INCORPORATED

SHOT PEENING CONTROL TECHNOLOGY

* Normally closed
* 100 lbs./min.
* 110 Vac or
* 24 Vdc

The Model 179 MagnaValve is a normally closed magnetic valve typically used
to replenish shot hoppers with cast steel shot or cut wire shot.

The valve construction includes a permanent magnet for normally closed
operation and an electromagnet to activate shot flow. By applying power to the
electromagnet, a full flow condition may be achieved. When power is off, the
valve will hold shot due to the permanent magnet.

179_ac_dcDATA.CDR 02/22/2003

* On - Off Valve
* No moving parts
* No air cylinders
* Steel shot/grit
* Fail Safe permanent
magnet construction

www.magnavalve.com

Advertising