RocketFish RF-ICAP23 - Quick Setup Guide User Manual

Rf-icap23 i quick setup guide, First time use, Charge the battery

Advertising
background image

Keyboard

First time use

When you unpack your Capsule keyboard, the internal battery is
only partially charged. You should charge it fully before using it.

Charge the battery

Connect your Capsule keyboard to a computer or the power adapter
using the USB cable (provided) to charge the internal battery.
Note: USB cable charging voltage is 4.4v ~ 6.0v. It is recommended
that you use iPad chargers or regular computers.

Capsule Keyboard Case

RF-iCAP23 I Quick Setup Guide

# Component

1 Earphone

jack

2 Battery

LED

3 Bluetooth

connection

LED

4 30-pin connect slot

5 Micro USB port

6 Release

button

7 Latch

lock

Package contents

• Capsule keyboard

• Ear phone jack spare cover

• USB cable

Quick Setup Guide

Features

• 82-key design, 18 hot keys for iPad 3rd Generation
• Compatible with Apple iPad 2
• Protective hard shell construction - Enhanced durability and stability
• Smart power management - Auto turn off when closed.
• Bluetooth version 3.0

Capsule parts

Setting up Capsule keyboard

1 Insert a finger into the gap,

then lift to open the top panel.

2a For typing mode, align and

2b For stand mode, pull the top panel

place the top panel on the gap.

forward towards the keyboard.

3 Place the bottom edge of the iPad

into the bottom of the top panel, push
up on the latch, then move the top
edge of the iPad into the top panel.

4 Release the latch to lock the iPad

in place.

5 To change out of typing Mode,

push the release button and pull the
top panel forward towards the keyboard.

# Description

1 Home

button

2 Search

button

3

Photo Slide Show button

4

Virtual Keyboard button

5

Select Left button

6

Select Right button

7 Copy

button

8 Cut

button

9 Paste

button

# Description

10

Previous track button

11 Play/Pause

button

12

Next track button

13 Mute

button

14

Volume down button

15

Volume up button

16 Lock

button

17 Pairing

button

18

International keyboard button

Description

Remove the rubber piece to connect an earphone to the iPad earphone jack.

Orange OFF: Battery full; Orange ON: Battery charging;
Orange BLINKING: Battery low

Blue FAST BLINKING (10 seconds): Re-connecting
Blue BLINKING (5 minutes): Searching for devices (pairing)
Blue ON (2 seconds): Just connected

Slide out the rubber piece to connect the 30-pin connector.

Connect to a USB power supply (e.g. wall charger or computer) with a Micro
USB cable to charge Capsule battery.

Push to release the top panel when in typing mode.

Slide latch lock upward to install iPad. Release and the iPad will lock into place.

B

B

A

A

A

Advertising