RocketFish RF-GWU1301 - Quick Setup Guide User Manual

Quick setup guide invisishell™ | rf-gwu1301, Installing your invisishell, Removing your invisishell

Advertising
background image

QUICK SETUP GUIDE

InvisiShell™ | RF-GWU1301

Installing your InvisiShell™

1 Disconnect the Wii U GamePad.

2 Open the InvisiShell, then orient and align the GamePad with the

InvisiShell.

3 Gently press the GamePad into the InvisiShell.

4 Close the top half of the InvisiShell, then press down on the right side of

the InvisiShell until the side snap clicks into place. Repeat on the left side.

5 While firmly holding the GamePad, press firmly up on each tab to lock the

InvisiShell closed.

Removing your InvisiShell

1 Disconnect the Wii U GamePad.

2 While firmly holding the GamePad,

press firmly down on each tab to
unlock them.

3 Open the InvisiShell by using your fingertips

to slowly separate the InvisiShell on the right side until the side snap
releases. Repeat this on the left side.

4 To remove the GamePad, firmly hold the InvisiShell and gently press the

ZR or the ZL button to lift the GamePad out.

90-day limited warranty

Visit www.rocketfishproducts.com for details.

Contact Rocketfish:

For customer service, call 1-800-620-2790
www.rocketfishproducts.com

™ and © 2012 Nintendo. Licensed by Nintendo.

ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2012 BBY Solutions, Inc. All Rights Reserved.

ENGLISH 12-1021

Tabs

Side snaps

Unlock

Tabs

Side snaps

Lock

Advertising