Rainbow Electronics MAX31D80 User Manual

General description, Features, Applications

Advertising
background image

________________________________________________________________ _Maxim Integrated Products_ _ 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

Spread-Spectrum Clock Generators

MAX31C80/MAX31D80

General Description

The MAX31C80/MAX31D80 are spread-spectrum clock
generators that contain a phase-locked loop (PLL)
that generates a 2MHz to 134MHz clock from an input
clock or crystal. The PLL can provide a spread-spec-
trum down-dithered (MAX31D80) or center-dithered
(MAX31C80) frequency-modulated clock. The devices
also buffer the incoming clock and provide this output
on a separate pin.
The MAX31C80/MAX31D80 are provided in a 10-pin
TDFN package and operate over a full -40NC to +125NC
automotive temperature range. Devices can be factory
programmed for multiple combinations of input and out-
put frequencies (see the Ordering Information table). A
low-cost, low-frequency crystal can be used at the input
to generate frequencies up to 134MHz.

Features

S

2MHz_to_134MHz_Spread-Spectrum_Clock_
Generator

S

Input_Can_Be_Either_an_8MHz_to_34MHz_Crystal_or_
8MHz_to_134MHz_Clock

S

Factory-Programmable_Output_Frequencies_in_
2MHz_to_134MHz_Range

S

Low-Cost_Crystal_at_Low_Frequency_Used_to_
Generate_High_Frequencies

S

On-Board_PLL_is_Capable_of_Spread-Spectrum_
Frequency_Modulation

S

Down-_or_Center-Dither_Spread-Spectrum_
Frequency_Modulation

S

User-Configurable_Spread-Spectrum_Dither_
Magnitude

S

Low_Cycle-to-Cycle_Jitter

S

3.3V_Supply_Voltage

S

Temperature_Range:_-40NC_to_+125NC

S

Small_Package:_10-Pin_TDFN_(3mm_x_3mm_x_
0.8mm)

Applications

Graphics Cards
Set-Top Boxes
Automotive Infotainment
Printers

19-5214; Rev 0; 4/10

Typical Application Circuit

Ordering Information

xxx = Factory-programmable output frequency and dither rate (see the Selector Guide table).
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
*EP = Exposed pad.

Selector Guide appears at end of data sheet.

MAX31D80

X1

SMSEL1

SMSEL0
GND

X2

XOUT

27MHz CLOCK

DECOUPLING
CAPACITOR

f

IN

= 27MHz

V

CC

f

IN

= 27MHz

CLKOUT

V

CC

f

CLKOUT

= 100MHz

1.5% DOWN DITHERED

V

CC

PART

TEMP_RANGE

DITHER_MODE

PIN-PACKAGE

MAX31C80T-xxx+

-40NC to +125NC

Center

10 TDFN-EP*

MAX31C80T-xxx+T

-40NC to +125NC

Center

10 TDFN-EP*

MAX31D80T-xxx+

-40NC to +125NC

Down

10 TDFN-EP*

MAX31D80T-xxx+T

-40NC to +125NC

Down

10 TDFN-EP*

Advertising