Rainbow Electronics MAX3469 User Manual

General description, Applications, Features

Advertising
background image

General Description

The MAX3465–MAX3469 are high-speed differential
bus transceivers for RS-485 and RS-422 communica-
tions. They are designed to meet TIA/EIA-422-B,
TIA/EIA-485-A, V.11, and X.27 standards. The trans-
ceiver complies with the Profibus specification provid-
ing +2.1V minimum output level with a 54

Ω load,

40Mbps data rate, and output skew less than 2ns. Each
part contains one three-state differential line driver and
one differential input line receiver. The devices operate
from a +5V supply and feature true fail-safe circuitry,
which guarantees a logic-high receiver output when the
receiver inputs are open or shorted. This enables all
receiver outputs on a terminated bus to output logic
highs when all transmitters are disabled.

All devices feature a 1/4-standard-unit load receiver
input impedance that allows 128 transceivers on the
bus. Driver and receiver propagation delays are guar-
anteed under 20ns for multidrop, clock distribution
applications. Drivers are short-circuit current limited
and are protected against excessive power dissipation
by thermal-shutdown circuitry. The driver and receiver
feature active-high and active-low enables, respective-
ly, that can be connected together externally to serve
as a direction control.

Applications

High-Speed RS-485 Communications

High-Speed RS-422 Communications

Level Translators

Industrial-Control Local Area Networks

Profibus Applications

Features

Recommended for Profibus Applications
Up to 40Mbps Data Rate
15ns Transmitter Propagation Delay
20ns Receiver Propagation Delay
2ns Transmitter and Receiver Skew
High Differential Driver Output Level (2.1V on 54)
Hot-Swap Versions
1µA Shutdown Supply Current
Low Supply Current Requirements (2.5mA, typ)
Allow Up to 128 Transceivers on the Bus
True Fail-Safe Receiver while Maintaining EIA/TIA-

485 Compatibility

Designed for Multipoint Transmissions on Long

or Noisy Bus Lines

Full-Duplex and Half-Duplex Versions Available
Phase Controls to Correct for Twisted-Pair

Reversal for 14-Pin Versions

Current-Limiting and Thermal Shutdown for

Driver Overload Protection

MAX3465–MAX3469

+5V, Fail-Safe, 40Mbps, Profibus RS-485/

RS-422 Transceivers

________________________________________________________________ Maxim Integrated Products

1

Ordering Information

PART

NUMBER

HALF/FULL

DUPLEX

RECEIVER/

DRIVER

ENABLE

LOW-

POWER

SHUTDOWN

HOT SWAP

RECEIVER/

DRIVER PHASE

SELECT

INDEPENDENT

SHDN PIN

PIN COUNT

MAX3465

Full

Yes

Yes

Yes

Yes

Yes

14

MAX3466

Full

Yes

Yes

No

Yes

Yes

14

MAX3467

Full

No

No

No

No

No

8

MAX3468

Half

Yes

Yes

Yes

No

No

8

MAX3469

Half

Yes

Yes

No

No

No

8

Selector Guide

19-3038; Rev 0; 10/03

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Ordering Information continued at end of data sheet.

PART

TEMP RANGE

PIN-PACKAGE

MAX3465CSD

0°C to +70°C

14 SO

MAX3465CPD

0°C to +70°C

14 Plastic DIP

MAX3465ESD

-40°C to +85°C

14 SO

MAX3465EPD

-40°C to +85°C

14 Plastic DIP

Pin Configurations appear at end of data sheet.

Advertising