B&B Electronics 852-10140--58 - Datasheet - Manual

www
.
bb
-
elec
.
com
|
multi-port, 10/100 mbps switching
standalone media converter
AccessConverter
multi-port, 10/100 mbps switching
standalone media converter
AccessConverter
Terminating a fiber run while using various local, copper-based
devices such as PCs, printers, VoIP, etc. is essential for the success of
Fiber-to-the Business, Curb and other FTTx projects. Remote locations
have similar configuration demands. Connecting the multiple copper
devices to the fiber, however, typically requires the use of both a media
converter and a switch— two pieces of equipment to purchase and
two pieces of equipment to monitor and maintain. The AccessConverter
streamlines FTTx projects as well as the connection of remote locations
as a multi-port, switching media converter.
Best of all, one compact AccessConverter module reduces the amount
of required equipment while providing all the features of a switch (store
and forward switching mechanics, MAC address learning, protection
against broadcast storms, flow control, etc.) and performing the
electrical-to-optical conversion. In addition, the unit’s small size and
wall-mount bracket (included) allow you to install AccessConverter
virtually anywhere, including inside a network interface device (NID).
requiring no configuration, the accessConverter offers plug-and-
play operation:
•
Each copper port auto-senses the connected device’s speed
and duplex mode (10 Mbps or 100 Mbps and HDX or FDX)
and includes AutoCross, a feature which automatically selects
between a crossover workstation (MDIX) or pass-through (MDI)
connection depending on the connected device
• The fiber port always operates at 100 Mbps FDX, and supports
distances up to 80 km; single-strand fiber versions are available.
• Low cost, high flexibility — same small unit performs media conversion
and switching functions
• Offers three downlink connections
• Compact size allows for flexible installation configurations
• Unmanaged
product FEaturEs
ordErIng InFormatIon
Model
nuMBer
FiBer
FiBer
Ports range
ethernet
Ports
ethernet
ConneCtor
accessConverter
852-10140
100 m 4 RJ45
852-10150 MM850-ST 1 2 km 3 RJ45
852-10151 MM850-SC 1 2 km 3 RJ45
852-10141 MM1300-ST 1 5 km 3 RJ45
852-10142 MM1300-SC 1 5 km 3 RJ45
852-10141-MT MM1300-MT 1 5 km 3 RJ45
852-10143 SM1310/PLUS-ST 1 40 km 3 RJ45
852-10144 SM1310/PLUS-SC 1 40 km 3 RJ45
852-10145 SM1310/LONG-ST 1 80 km 3 RJ45
852-10146 SM1310/LONG-SC 1 80 km 3 RJ45
852-10147 SM1550/LONG-SC 1 80 km 3 RJ45
single-strand FiBer *
852-10153 SSFX-SM1310-SC 1 20 km 3 RJ45
852-10154 SSFX-SM1550-SC 1 20 km 3 RJ45
852-10155
SSFX-SM1310/
PLUS-SC
1 40 km 3 RJ45
852-10156
SSFX-SM1550/
PLUS-SC
1 40 km 3 RJ45
852-10157
SSFX-SM1310/
LONG-SC
1 60 km 3 RJ45
852-10158
SSFX-SM1550/
LONG-SC
1 60 km 3 RJ45
* These products have single-strand fiber technology. Deploy in pairs or connect another compatible
B&B IMC LLC single-strand fiber product.
AccessConverter_3713ds