B&B Electronics ADAM-5017H - Datasheet - Manual

Distributed DA&C Systems
All product specifications are subject to change without notice Last updated : January 2005
 Channels 8 differential
 Effective Resolution 16-bit
 lnput Type mV, V, mA
 lnput Range ±150 mV, ±500 mV, ±1
V, ±5 V, ±10 V; ±20 mA
 Isolation Voltage 3000 V
DC
 Fault and Overvoltage Withstands overvoltage
Protection up to ±35 V
 Sampling Rate 10 samples/sec. (total)
 Input Impedance 2 M Ω
 Bandwidth 13.1 Hz @ 50 Hz, 15.72
Hz @ 60 Hz
 Accuracy ±0.1% or better
 Zero Drift ±1.5 mV/° C
 Span Drift ±25 PPM/° C
 CMR @ 50/60 Hz 92 dB min.
 Power Consumption 1 W (typical);
1.25 W (max.)
 Analog Signal Range ±15 V max.
Note: The voltage difference between any two pins
must not exceed ±15 V
Ordering Information
 ADAM-5017 8-channel Analog Input
Module - mV, V, mA
 Channels 8 differential
 Effective Resolution 12-bit plus sign bit
 Input Type mV, V, mA
 Input Range ±250 mV, ±500 mV,
±1 V, ±5 V, ±10 V, 0 ~
+500 mV,
0 ~ +1 V, 0 ~ +5 V, 0 ~
+10 V,
0 ~ 20 mA, 4 ~ 20 mA
 Isolation Voltage 3000 V
DC
 Sampling Rate Depends on base unit
ADAM-5000/485 & 5000E: 100 samples/sec
ADAM-5510:
8000 samples/sec max.: one ADAM-5017H installed
ADAM-5510KW: Up to 100 samples/sec
ADAM-5511: Up to 100 samples/sec
ADAM-5000/TCP:
1000 samples/sec max.: depending on the
performance of client server or controller
 Input Impedance 20 M Ω (voltage inputs)
125 Ω (current inputs)
 Bandwidth 1 kHz
 Signal Input Bandwidth 1 kHz for both voltage
and current inputs
 Accuracy ±0.1% or better
 CMR @ 50/60 Hz 92 dB min
 Power Consumption 1.75 W (typical);
2.2 W (max)
 Distinct Range Settings Allowed on Each
Channel
Note: The voltage difference between any
two pins must not exceed ±15 V
Ordering Information
 ADAM-5017H 8-channel High-Speed Analog
Input Module - mV, V, mA
 Channels 3
 Effective Resolution 16-bit
 lnput Type PT100 or Ni RTD
 RTD Types and Temperature Ranges
IEC RTD 100 ohms
Pt -100° C to +100° C a=0.00385
Pt 0° C to +100° C a=0.00385
Pt 0° C to +200° C a=0.00385
Pt 0° C to +600° C a=0.00385
JIS RTD 100 ohms
Pt -100° C to +100° C a=0.00392
Pt 0° C to +100° C a=0.00392
Pt 0° C to +200° C a=0.00392
Pt 0° C to +600° C a=0.00392
Ni RTD
Ni
-80° C to +100° C
Ni 0° C to +100° C
 Isolation Voltage 3000 V
DC
 Sampling Rate 10 samples/sec. (total)
 Input Impedance 2 M Ω
 Bandwidth 13.1 Hz @ 50 Hz, 15.72
Hz @ 60 Hz
 Input Connections 2, 3 or 4 wire
 Accuracy ±0.1% or better
 Zero Drift ±0.015° C/° C
 Span Drift ±0.01° C/° C
 CMR @ 50/60 Hz 150 dB
 NMR @ 50/60 Hz 100 dB
 Power Consumption 0.85 W (typical);
1.1 W (max.)
Ordering Information
 ADAM-5013-A1 3-channel RTD Input Module
3-channel RTD Input Module
8-channel Analog Input Module
8-channel High-Speed Analog Input Module
ADAM-5013
ADAM-5017
ADAM-5017H
ADAM-5013 ADAM-5017 ADAM-5017H
Specifications Specifications Specifications