Advantech APAX-5045 - Manual

www.advantech.com/products Online Download
20-21
19
PC-based Controllers
Embedded Controllers
20
PAC
21
Motion Control
22
RS-485 I/O
23
Ethernet I/O
24
Building Automation
25
Self-service Terminals
26
eHome Platforms
27
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions (W x H x D) 30 x 139 x 100 mm
ƒ Enclosure ABS+PC
ƒ Weight 160 g
ƒ Power Consumption 2 W @ 24 V
DC
(typical)
ƒ Status Display LED per channel
On: Logic level 1
Off: Logic level 0
Digital Input
ƒ Channels 24
ƒ Points per Common 12
ƒ Type Sink or Source Load
ƒ Input Voltage Rated Value: 24 V
DC
For "0" signal: - 5 ~ 5 V
DC
For "1" signal: 15 ~ 30 V
DC
and -15 ~ -30 V
DC
ƒ Input Impedance 10 k W
ƒ Input Delay From logic level 0 to 1: 0.2 ms
From logic level 1 to 0: 0.2 ms
ƒ Operating Frequency 3 kHz
ƒ Input Filter 3 ms
Protection
ƒ 2,500 V
DC
Isolation Between Channels and Backplane
ƒ Over Voltage Protection
Environment
ƒ Operating Temperature -10 ~ 60° C (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5040 24-ch Digital Input Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX Expansion Module
APAX-5040
APAX-5040
APAX-5045
24-ch Digital Input Module
24-ch Digital Input/Output Module
RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions (W x H x D) 30 x 139 x 100 mm
ƒ Enclosure ABS+PC
ƒ Weight 165 g
ƒ Power Consumption 2.5 W @ 24 V
DC
(typical)
ƒ Status Display LED per channel
On: Logic level 1
Off: Logic level 0
Digital Input
ƒ Channels 12
ƒ Points per Common 12
ƒ Type Sink or Source Load
ƒ Input Voltage Rated Value: 24 V
DC
For "0" signal: - 5 ~ 5 V
DC
For "1" signal: 15 ~ 30 V
DC
and -15 ~ -30 V
DC
ƒ Input Impedance 10 K W
ƒ Input Delay From Logic level 0 to 1: 0.2 ms
From Logic level 1 to 0: 0.2 ms
ƒ Operating Frequency 3 kHz
ƒ Input Filter 3 ms
Digital Output
ƒ Channels 12 (Sink)
ƒ Voltage Range 8 ~ 35 V
DC
ƒ Rated Current Output 0.5 A (per channel, at signal "1")
ƒ Permitted Current Output Max. 0.75 A (at signal "1")
ƒ Leakage Current 0.1 mA (at signal "0")
ƒ Switch Rate: Resistive load: 300 Hz (max.)
Inductive load: max. 20 Hz (max.)
Lamp load: max. 200 Hz (5W lamp and under 50 W, 24 V)
Protection
ƒ 2,500 V
DC
Isolation Between Channels and Backplane
ƒ Over Voltage Protection (for DI channel)
ƒ Short Circuit Protection (For DO channel)
ƒ Thermal Shutdown Protection (For DO channel)
Environment
ƒ Operating Temperature -10 ~ 60° C (mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5045 24-ch Digital Input/Output Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX Expansion Module
APAX-5045