Advantech APAX-5013 - Datasheet - Manual

www.advantech.com/products Online Download
20-19
19
PC-based Controllers
Embedded Controllers
20
PAC
21
Motion Control
22
RS-485 I/O
23
Ethernet I/O
24
Building Automation
25
Self-service Terminals
26
eHome Platforms
27
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions (W x H x D) 30 x 139 x 100 mm
ƒ Enclosure ABS+PC
ƒ Weight 170 g
ƒ Power Consumption 2.5 W @ 24 V
DC
(typical)
Analog Input
ƒ Channels 8 (Differential)
ƒ Input Impedance >10 M W
ƒ Input Type Pt-100, Pt-200, Pt-500, Pt-1000, Balco, Ni 518 RTD
(2-wire and 3-wire)
ƒ Temperature Range Pt-100, Pt-200, Pt-500, Pt-1000:
-120 ~ 130° C, -200 ~ 850° C
Supports both IEC 60751 ITS90 (
0.03851 W/W/° C)
and JIS C 1604 (0.03916 W/W/° C)
Balco 500: -30 ~ 120° C
Ni 518: -80 ~ 100° C, 0 ~ 100° C
ƒ Configure Different Range for Each Channel
ƒ Resolution 16-bit with accuracy ±0.1% of Full Scale Range
ƒ Sampling Rate 10 sample/second (total)
ƒ Noise Rejection Hardware Filter (50/60 Hz)
ƒ Wire Burn-out Detection Yes
Protection
ƒ 2,500 V
DC
Isolation Between Channels and Backplane
Environment
ƒ Operating Temperature -10 ~ 60° C (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5013 8-ch RTD Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX Expansion Module
Specifications
General
ƒ Certifications CE, FCC class A
ƒ Dimensions (W x H x D) 30 x 139 x 100 mm
ƒ Enclosure ABS+PC
ƒ Weight 170 g
ƒ Power Consumption 4 W @ 24 V
DC
(APAX-5017)
(typical) 3.5 W @ 24 V
DC
(APAX-5018)
Analog Input
ƒ Channels 12 (Differential)
ƒ Input Type V, mV, mA (APAX-5017)
V, mV, mA, Thermocouple (APAX-5018)
ƒ Input Impedance Voltage: >10 M W (APAX-5017), >1 MW (APAX-5018)
Current: 120 W (Current)
ƒ Voltage/Current Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20
mA, 4 ~ 20 mA (APAX-5017)
±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA,
0 ~ 20 mA, 4 ~ 20 mA (APAX-5018)
ƒ Temperature Range Type J (-210 ~ 1200° C), Type K (-270 ~ 1372° C),
(APAX-5018 only) Type T (-270 ~ 400° C), Type E (-270 ~ 1000° C),
Type R (0 ~ 1768° C), Type S (0 ~ 1768° C),
Type B (300 ~ 1820° C)
ƒ Configure Different Range for Each Channel
ƒ Resolution 16-bit with accuracy ±0.1% or better of Full Scale Range
(Voltage), ±0.2% or better of Full Scale Range(Current)
Note: Refer to manual for Thermocouple accuracy
ƒ Sampling Rate 12 samples/second (total)
ƒ Noise Rejection Hardware Filter (50/60 Hz)
ƒ Wire Burn-out Detection APAX-5017: Yes (4 ~ 20 mA only)
APAX-5018: Yes (4 ~ 20 mA and Thermocouple)
ƒ Common Mode Voltage 200 V
DC
Protection
ƒ 2,500 V
DC
Isolation Between Channels and Backplane
ƒ Over Voltage Protection
Environment
ƒ Operating Temperature -10 ~ 60° C (when mounted vertically)
ƒ Storage Temperature -40 ~ 70° C
ƒ Relative Humidity 5 ~ 95% (non-condensing)
Ordering Information
ƒ APAX-5017 12-ch Analog Input Module
ƒ APAX-5018 12-ch Thermocouple Input Module
ƒ APAX-5001 1-slot Backplane Module
ƒ APAX-5002 2-slot Backplane Module
ƒ APAX-5343E Power Supply for APAX Expansion Module
APAX-5013
APAX-5017
APAX-5018
8-ch RTD Module
12-ch Analog Input Module
12-ch Thermocouple Input Module
RoHS
COMPLIANT
2002/95/EC
RoHS
COMPLIANT
2002/95/EC
APAX-5013 APAX-5017 APAX-5018