American Car Craft Camaro Valve Cover_Coil Pack Cover Set Polished ZL1 Only 2012-2013 User Manual
American car craft instructions
AMERICAN CAR CRAFT INSTRUCTIONS
CAMARO VALVE COVER/COIL PACK COVER SET 26pc ZL1
PART #103056
Parts Included:
20 - Long Zip Ties
2 - Stainless Valve Covers
8 - Coil Pack Covers
16 - 10mm Chrome Bolt Covers
1 - Large Plastic Gloves
1 - 3/8” Rubber Vacuum Cap
1 - 10” Length of #10 Wire
1 - Large Ring Connector
1 - Large Yellow Butt Connector
1 - 48” Length of 3/8” Vacuum Hose
Introduction: This all new design is the first to allow anyone to upgrade the factory valve cover coil pack assembly to an
all custom high polished show car look.
Liner Information: Your new accessories will come to you with a protective surface liner. Leave this liner in place until
the installation is complete to prevent finger prints and or possible scratches during installation.
The first step for this application will be to perform a much needed wire tuck procedure. This will rearrange the
spaghetti like placement of the factory wire harnesses and vacuum line strummed across the engine.