American Car Craft Challenger 5.7L and 6.1L SRT 8 Firewall Extensions with Hood Pin Switch Brushed 2pc 2008-2011 User Manual
American car craft instructions
Advertising
AMERICAN CAR CRAFT INSTRUCTIONS
CHALLENGER FIREWALL EXTENSIONS 2PC w/HOOD PIN - BRUSHED
PART # 153051
Parts Included:
2 x Stainless Top Plates
1 x 9/64 Cobalt Drill Bit
4 x #8 3/8” Pan Head Screws
4 x White Nylon Sockets
4 x Chrome Screw Covers
Introduction: These new extensions have been specifically designed for use with the
Challenger Firewall only.
Liner Information: Your new accessories will come to you with a protective surface liner.
Leave this liner in place until the installation is complete to prevent finger prints and or
possible scratches during installation.
Advertising