ZMODO ZP-KC1H04-P 4 Channel 720P PoE NVR System - Quick Installation Guide - Manual

Quick Installation Guide
Zmodo POE NVR/IP Cameras System
GETTING STARTED
CONNECTING TO YOUR CAMERA ON iOS AND ANDROID
Download and install Zmodo Zsight
software from the App store iPhone)
or Google play (Android) or download
from website:
1
www.zmodo.com/support-software/
2
Note:
If your phone can not scan QR code, please refer to Zviewer for phone (Android and iOS) Website:
www.zmodo.com/support-software/
Package Includes
(1) 4 Channel Security NVR
(4) IP Network Cameras
(1) 12V 3A Power Adapter for NVR
(1) 48V 1A Power Adapter for NVR to Provide Power to IPC
(4) 60ft Network Cables
(1) 3ft Network Cable
(1) IR Remote Control & Mouse
(1) Quick Installation Guide
Note:
1. Please make sure that router’s UPNP is enabled before connecting camera.
2. Please make sure that your mobile device is connected to the same network as
the NVR.
3. Please make sure that IP Cameras, NVR and router are in the same network. IP
Cameras’ default IP addresses are 192.168.1.150, 192.168.1.152, 192.168.1.154,
192.168.1.156. NVR’s default IP address is 192.168.1.10, so router’s IP address
must be set 192.168.1.1. Here we have an Actiontec router as an example:
iPhone Android
3
Download (Website: http://www.zmodo.com/support-software/)
List Includes:
Zsight-iOS(Software)
Zsight-Android (Software)
Zviewer-Windows (Software)
Zviewer-iOS(Software)
Zviewer-Android(Software)
Zmdplayer(Software)
IPCSearch(Software)
System Requirements: iPhone: iPhone v4.3 up and a valid iTunes account. Android: Android v2.3 up.
Click [Device by ID], enter ID number, and click [Next]. 4
9999998001 9999998001
First Method: Remote connection by adding NVR’s ID
Find "Setting", and click [Device Management]. 2 Right click in the blank area on the right, then select [Add]. 3 Launch ZViewer on your PC, enter “User Name” (Default:
admin) and “Password” (Default: 111111), then click [Login].
1
CONNECTING TO YOUR CAMERA ON PC
Note : NVR and Internet must be connected
Install the ZViewer windows software from www.zmodo.com/support-software/ . There are two ways to connect your camera on PC.
Tap the icon from the
home screen to open
Zmodo Zsight, and click
[Add], this will take you to
the “Add Device” section.
Tap the image of QR code, then
scan the QR code area on the
NVR with your phone.
4 Enter the default
password “111111”,
and click [Save].
5 Click the device from the
[List] on your mobile device,
and you will be able to see
the video stream.
Power Supply
DC 12V
Power Supply
DC 48V
VGA