ADATA PV100 User Manual

Pv100 power bank user’s manual, Overview product features, Specifications

Advertising
background image

PV100 Power Bank User’s Manual

Overview

Product Features

PUSH

ON/OFF

PUSH

ON/OFF

8mm thickness

Power indicator

Power / Indicator button

MicroUSB

Input

Output

Six layers of circuit protection (overcharge protection / over-discharge protection /

over-temperature protection / short circuit protection / over voltage protection /

over-current protection)

Slim design of only 8mm thickness

2.1 Ampere output for fast charging

Fast charging recognition of most mainstream handheld devices.

LED power indicator

Specifications

Battery capacity: 4200mAh (Lithium polymer rechargeable battery 15.54W)

Rated voltage: Input 5V DC/1A (Micro-USB)

Output 5V DC/2.1A (Type-A USB)

Charging time: 4~6 hours

Dimensions: 67 x 118 x 8mm / 2.6 x 4.6 x 0.3in

Weight: 105g / 3.7oz

Note: Rated capacity for this product is: 2907mAh (14.535 Wh)

Power Display

Press Power ON/OFF to display the power status.

Indicator

Status

Light on

Flashing

Power display

1. Power bank is charging
2. Low battery warning

Dim light Standby / Charging / No power

PUSH

ON/OFF

PUSH

ON/OFF

PUSH

ON/OFF

PUSH

ON/OFF

PUSH

ON/OFF

25%

50%

75%

100%

Operation

Charging your handheld device

Use USB output for charging

Discharging

(Output)

Press and hold the power switch for 2

seconds to begin charging of the mobile

device.

The power bank will automatically shut

down after 5 minutes of non-use, to save

power.

PUS

H

ON/OF

F

PUSH

ON/OFF

Charging

(Input)

Charging the power bank

The LED will automatically start to blink

while the power bank is charging.

Charge through a computer or other device

that supplies USB power.

Cautions

1. Use either the microUSB cable that comes packaged with this product, or a

high-performance USB travel charging cable.

2. Do not leave this product in an enclosed vehicle. Extreme heat and sunlight may

damage the power bank.

3. Do not expose the product to high temperatures or humid environments.

4. Do not insert metal or foreign objects into the product,

so as to avoid short-circuits and damage.

5. Do not disassemble, damage, jolt, or burn the product. Do not subject it to heavy

weight.

6. Do not arbitrarily discard this product; recycle used batteries in accordance with local

laws.

7. If not used long-term, charge the device once every three months in order to maintain

the battery lifespan.

Warranty

ADATA warranty policy applies to all customers who purchased ADATA products through

authorized agents.

ADATA provides replacement or repair services for defective products within the

applicable warranty period.

Please note that ADATA is not responsible for providing free repairs if the product defect

is caused by any of the following factors:

( 1) Damage caused by natural calamity or any inappropriate usage.

(2) Product has been repaired or taken apart by unauthorized technicians.

(3) The warranty label is altered, damaged or missing.

(4) Product serial number does not conform to our original system or the label has been

damaged.

(5) Products purchased from unauthorized agents. This limited warranty covers only

repairs or replacements of ADATA products. ADATA is not liable for any loss of data

or any cost incurred from determining the source of system problems, removing,

servicing or installing ADATA products.
For more information, visit the ADATA website www.adata-group.com/login

Recycle old batteries properly

EN

Advertising