Buyers SLH100 - Manual

Quality since 1946
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Installation Instructions
SLH100
Hasp for Security Lock
1. Locate lock hasp across door(s).
2. Align perpendicular.
3. Mark holes.
4. Remove interior panels prior to
drilling to check for interference.
5. Drill six (6) 13/32" holes
Warranty
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transportation or labor performed on Buyers’ prod-
ucts will be allowed under this warranty.
3008249 Rev B
CAUTION
Always wear protective eyewear and gloves to
protect from sharp edges and debris.
1
2
3
Bill of Materials
1 - 1 Hasp, Welded, Right
2 - 1 Hasp, Welded, Left
3 - 1 Hardware Kit, Security Lock Hasp
Washer (6), Fender 3/8 x 1½ ZN
Nut (6), Nylock, 3/8-16 Hex ZN
Bolt (6), Carriage 3/8-16 x 1¼ Zinc
item part no. qty. description