Billet Specialties Legacy & Dragster Knock-Offs - Manual

Billet Specialties, Inc. 500 Shawmut Avenue La Grange, Illinois 60526 PH 800.245.5382 Fax 708.588.7181 www.billetspecialties.com
09/07
SPINNER
LUG COVER
HUB ASSEMBLY
LUG NUT
WASHER
WHEEL
BRAKE DISC
NOTE: ONLY HAND TIGHTEN SPINNER
OR NUT. USE OF ANY TOOLS WILL
DAMAGE PRODUCT.
KNOCK-OFF INSTALLATION INSTRUCTIONS
NOTE: FOR PROPER FIT USE THE APPROPRIATE BILLET SPECIALTIES LUG
NUT SET FOR YOUR SPECIFIC APPLICATION:
999925
999926
999935
999945
999946
12mm-1.5 Mag Shank
12mm-1.5 Duplex Mag for 5x5 bolt circle
7/16-20 Mag Shank
1/2-20 Mag Shank
1/2-20 Duplex Mag for 5x5 bolt circle
Torque Specs:
12mm
14mm
7/16-20
1/2-20
75-85 ft.lbs.
85-95 ft.lbs.
70-80 ft.lbs.
75-85 ft.lbs.
1. LIFT WHEEL/TIRE ASSEMBLY ONTO DISC/DRUM AND WHEEL
MOUNTING STUDS.
2. CENTER SPINNER HUB ASSEMBLY OVER WHEEL BOLT CIRCLE; ALIGN
HUB MOUNTING DISC WITH WHEEL MOUNTING STUDS; INSTALL LUG NUTS
AND WASHERS THROUGH HUB MOUNTING DISC AND WHEEL; TIGHTEN.
NOTE: REVERSE-THREAD HUBS [LEFT HAND THREAD] MOUNT ON
PASSENGER SIDE OF VEHICLE
3. SLIDE LUG COVER OVER SPINNER HUB AND HOLD IN PLACE WHILE
THREADING SPINNER [OR NUT] ONTO HUB UNTIL IT BOTTOMS AGAINST
TOP OF COVER. NOTE: ONLY HAND TIGHTEN SPINNER OR NUT.
USE OF ANY TOOLS WILL DAMAGE PRODUCT.
MAINTENANCE: KEEP THREADS COATED WITH A THIN LAYER OF
ANTI-SEIZE.
TIP: USE A PERMANENT MARKER TO WRITE THE THREAD DIRECTION AND
DRIVER/PASSENGER SIDE ON HUB ASSEMBLY UNDER THE CAP.