Mustang Motorcycle Seats Studded Pouch Tank Bib - Honda VT1100 ACE User Manual
Mustang Motorcycle Seats For motorcycles
Advertising
Installation Instructions for
Mustang Tank bib on
Honda VT1100 Sabre, VT1100 ACE
& ACE Tourer, and VT1100 Spirit
Installation of tank bib
1. Remove seat from bike.
2. Remove mounting screws from top and base
of gas tank.
3. Slide tank bib into place, and insert both tank
screws, tighten.
4. Replace seat.
These steps are guidelines to help you install your new
Mustang product. If you need
further assistance please call us at 800-243-1392, Monday
through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref. part #’s 93101, 93102, 93312, 93313
Enjoy the custom look of your new
Mustang tank bib.
Advertising