SCANTECH ID (Champtek company) Discovery SG-20 User Manual
SCANTECH ID (Champtek company) Scanners
Advertising
Table of contents
Document Outline
- Chapter 1 Safety
- Chapter 2 General Description
- 2.1 USE OF THE DISCOVERY SG-20
- 2.2 CONSTRUCTION OF THE DISCOVERY SG-20
- 2.3 FUNCTIONING OF THE DISCOVERY SG-20
- 2.3.1 Introduction
- 2.3.2 Input
- The main input is generated by the integrated Scantech barcodereader, which is characterised by a high performance omnidirectional scan-performance. Additionally some commands or actions can be selected using the buttons next to the screen (depends on application). If required an additional handscanner or other serial-interface device can be attached (contact Scantech for details).
- 2.3.3 Output
- 2.3.4 Software & control
- Chapter 3 Installation of the Discovery SG-20
- Chapter 4 System Integration
- Chapter 5 Configuring the Discovery
- Chapter 6 Ethernet Configuration
- 6.1 ETHERNET NETWORK CONFIGURATION
- 6.2 NETWORK PROTOCOLS
- 6.3 HOW TO GET IN TOUCH WITH AND TO CONFIGURE THE SG-20 DISCOVERY ETHERNET
- 6.4 CONFIGURING THE DISCOVERY USING THE BUTTONS
- 6.5 PHYSICAL CONNECTION
- 6.6 Q & A , BASIC ETHERNET TROUBLESHOOTING
- 6.7 STATUS LEDS
- 6.8 NON WINDOWS USERS
- 6.9 RELATED DOCUMENTS
- Chapter 7 Maintaining the Discovery
- 7.1 CLEANING
- Introduction
- Display messages
- Display command characters
- Introduction
- Display programming examples
- Example 1
- Example 2
- Example 3
- Example 4
- Example 5
- Example 6
- Example 7
- Example 8
- Screen 4.2
- Bar Codes To Program the Scanner
- H-1 GENERAL
- H-2 I-START/ U-START AND THE SG-20 USER’S MANUAL
- H-3 DRIVERS & OPERATING SYSTEMS
- H-4 INTERFACES & CABLES
- RS-485
- RS-422
- Ethernet
- Wireless Networking, RFDC
- H-6 SG-10 COMPATIBILITY
- H-7 COMPETITIVE COMPATIBILITY
- H-8 SETTINGS
- H-9 BACK-OFFICE
- H-10 HANDSCANNER SUPPORT
- H-12 BARCODES
- H-13 SERVICE
- H-14 TECHNICAL QUESTIONS & ANSWERS
- Scantech supplies:
- The Distibutor / System Integrator supplies:
- 7.1 CLEANING