1 unpacking, 2 mounting, 1 mounting the bracket to the wall – SCANTECH ID (Champtek company) Discovery SG-20 User Manual

Page 24: Unpacking, Mounting, Mounting the bracket to the wall

Advertising
background image

System Integration

16

3.1

UNPACKING

Unpack the Discovery as follows:

1.

Take the Discovery and its accessories out of the box.

2.

Remove the packing material.

3.

Check the packing list to make sure you have received all of the items

ordered.

4.

Visually inspect the Discovery and accessories for any evidence of physical

damage.

5.

If anything is missing or appears to be damaged, immediately contact your

dealer.

ATTENTION

Store the packing material and boxes: it should be used whenever

the Discovery is transported for servicing.

3.2

MOUNTING

Once you have unpacked all components, you can start installing the Discovery.

Installing the Discovery is divided in two steps:

1.

Mounting the Discovery bracket to the wall.

2.

Placing the Discovery on the bracket

(and pushing the lockplate to fasten the Discovery on the bracket.)

3.

Installation is discussed in detail in the following subsections.

3.2.1

Mounting the bracket to the wall

Mount the bracket of the Discovery as follows:

Advertising