1 ethernet network configuration, 1 preface, Ethernet network configuration – SCANTECH ID (Champtek company) Discovery SG-20 User Manual

Page 58: Preface

Advertising
background image

Ethernet Configuration

50

6.1

ETHERNET NETWORK CONFIGURATION

6.1.1

Preface

The SG-20/Ethernet is provided with a converter module which lifts the

standard Discovery communication to Ethernet level. The unit uses IP protocol

for network communications. The supported protocols are ARP, UDP, TCP,

ICMP, Telnet, TFTP, DHCP, HTTP, SNMP, and BOOTP (TCP for connection-

oriented stream applications and UDP for datagram applications).

The main benefit is providing network connectivity.

The unit (P/N A360103/4/5 or newer) is linked directly to your Local Area

TCP/IP Network.

IP addressing and configuration can be done through a Telnet session, by

means of Scantech’s utility U-Start or by using the 4 buttons (from P/N

A360104 onwards, see section 6.4).

IMPORTANT

The network cabling, hub etc. is supplied and installed by the

Scantech Distributor.

The SG-20/Ethernet is shipped with default IP address set to

0.0.1.0, i.e. DHCP enabled.

The original standard Discovery (RS232/422/485 with P/N

A360102), is not field upgradable to Ethernet.

Advertising