SCANTECH ID (Champtek company) Discovery SG-20 - Manual (Page 64)

Ethernet Configuration 56
4. Click on the ‘Connect’ button. The program will search for the unit on your
local network and try to make connection. The word ‘Connected !’ must
appear on the screen of the Discovery. In exceptional cases you don't get
connection right away and a second attempt must be made.
5. Click on the Discovery screen to activate the Terminal Mode. Anything you
type on your keyboard will show up on the screen of the Discovery.
6. Any bar code scanned at the Discovery will show-up on your PC screen,
enclosed (on the CD) you find a sheet with 4 special bar codes for demo
purposes.
7. The Discovery commands (ESC sequences) can be generated pressing
ESC key plus the matching command character, e.g.:
a) ESC and Z will reset the terminal (capital Z)
b) ESC and @ will kick the unit terminal into sleep
c) ESC and A will wake the unit up again
See also Appendix B for the complete command set.
6.3.2 Set the IP address of the individual terminal
1. Note: At the Discovery with hardware P/N from A360104, the IP address
can also be configured by using the buttons of the Discovery. See Chapter
6.4. The on line Ethernet Setup Mode can be entered by re-connecting the
unit;
Input Port address 9999: and click on the LED:
the Discovery will respond with: