9 related documents, Related documents – SCANTECH ID (Champtek company) Discovery SG-20 User Manual
Page 74
Ethernet Configuration
66
192.137.81.210
00-20-4A-52-4B-19
static
3
Start a TELNET connection to configure the unit:
telnet 192.137.81.210 1
a
a
a
This connection (on port 1) will fail in first instance (after 3 seconds,
abort link), but the SG-20 will register the attempt by enabling the Telnet
service on port 9999.
4
Continue with: telnet 192.137.81.210 9999
a
a
a
The response must be:
5
Hit
a a
and you’ll get in the Configuration screen: (if you wait too long,
the connection will fail and you have to disconnect and re-connect).
Proceed at Point 3 above. You may skip steps 3 .. 7 of section 6.4 in
case you run a DHCP service on your network.
6.9
RELATED DOCUMENTS
Discovery User’s Manual Scantech P/N A362001
Version 2.1
Discovery Product Support CD-ROM P/N A362103
Version 2.1
Lantronix CoBox Micro Manual
Revision D
Reference Cobox Micro.