Media-Tech DRIVE GUARD - Manual

DRIVE GUARD
Instructions Manual Your personal Driving Blackbox!
MT4044
EN
Setting the functions:
Turn on the DVR and press Menu Button under Video
mode or Camera mode to enter into setting interface. Con-
firm by REC Button and select by Up/Down for the follow-
ing setting. Press Menu Button again to exit after finished.
A) Video mode:
1. Size: Select [1280x960/ 720x480/640x480] pixels
2. Time Stamp: Select Off/Date only/Date & Time
3. Motion Detect: Select On/Off
Note: When select Motion detect function, it will be record-
ing automatically if there is an object movement and stop
recording if no movement.
4. Audio Record: Select On/Off
5. Recording time: select [2/5/15] minute.
B) Camera mode::
1. Size: [1.2M/ VGA]
C) Setting Mode:
Whether under Video mode or capture mode, press Menu
Button twice to enter into Setup interface.
1. Format: Select if you want to format SD card.
2. Language: Select [English/Chinese/Japanese/Russian]
3. System Reset: restore factory settings
4. Light Frequency: set [50/60Hz].
5. Date input: Set actual date and time by Rec Button and
Up/DownButton.
6. TV Output
Operate
Two Power options:
A. Use built-In Li-ion battery
DVR can be activated after It has been placed on the
vehicle by pressing the Power Switch for 3 seconds and
turn off by pressing it again.
Charging: connect with USB cable or car charger. The indi-
cator display and convert to no light when it is full
B. Connect with Car Charger
DVR wiII record automatically when the car starts, turn
off and save the last file when the car stops.
Note! It is recommended to install rechargeable bat-
tery in order to keep date and other user settings.
Recording
DVR will enter into default recording mode when turn it
on, the work indicator blickers and indicates it is recording.
The recording file is saved in the SD/MMC Card. To stop,
press Recording Button or ending when car stops, the
work indicator won’t blicker.
Camera mode
Turn on the DVR and press Mode Button to enter into Cam-
era mode. To take photo press Snap Button.
Preview and delete
Turn on the DVR and press Mode Button twice to enter into
Preview Mode, Press Up or Down to select the previewed
file. If it is video file, it can play or stop by pressing REC But-
ton. If you want to delete it, press Menu Button to enter
into delete mode, and than, select Single, All or Select by
REC Button and UP/Down and confirm to delete the file
by press Rec Button. You can also enable thumbnail mode
and adjust volume (from 1 to 8) when in Preview Mode.
1
6
4 5
7
11
12
13 14 15 16
10
8
9
270°
3
2
1. USB Slot
2. TV OUT
3. SD/MMC Card Slot
4. Speaker
5. Mount hole
6. Microphone
7. Battery cover
8. Lens
9. IR LED
10. ON/OFF Power Switch Charging indicator
11. REC/SNAP Working indicator
12. LCD
13. Menu
14. Down
15. Up
16. Mode Button
Due to continuous development specification and appear-
ance of product are subject to change without prior notice.
For technical support please visit www.media-tech.eu.