Media-Tech SCANLINE COMBO - Manual

SCANLINE COMBO
Instructions Manual PORTABLE AUTOFEEDING COLOR SCANNER FOR A4 DOCUMENTS
MT4093
EN
Time and Date setting
1. Press [TIME SET] button once to enter time setting mode by using a thin,
blunt object, such as the end of a paperclip to access the button. The LCD
status display screen will show “1 ##” (step 1) for the year. “##” is a set of
number that would be changed to correspond to the actual time/date set-
ting. The numbers 1-5 in front of “##” indicates each step in the settings. Time
(2012.1.1~2050.12.31)
2. Press the [JPG/PDF] or [DPI] button to select the current Year.
3. Press the
button once to confi rm setting.
4. Repeat step 2 and 3 to continue the Time and Date setting process
5. After setting the Minute, “5##”, press the [TIME SET] button again to complete
the Time and Date setting.
Formatting the micro SD memory card
1. Insert a new micro SD card into the scanner, and then turn on the scanner.
2. Press the format button into format mode. “F” will display on the LCD.
3. Press the
button once to format the micro SD card.
4. SD card indicator will blink until format is complete.
Setting the resolution
Press the [DPI] button to select High / Medium / Low resolution.
High/ Medium / Low resolution icon will be displayed on status LCD.
Setting the scan mode
Press the [JPEG/PDF] button to select JPEG/PDF mode.
JPEG/PDF icon will be displayed on status LCD.
How to fi x the scanner
1. Put on the scanner
Slide the Fixed button from Lock towards Release, then put the scanner on the
docking by leaning the right side in fi rst. Use USB cable and plug it to PC computer.
2. Take out the scanner
Slide the Fixed button from Lock towards Release, then take the scanner out
from the docking by raising the left side fi rst.
For scanner with docking:
a. Adjust the Width Controller to an appropriate gear in accordance with the size
of the document.
b. Smooth the edge of the document before scanning
c. Aim the edge of the document at the slot of the scanner. (Align to the right
side of the slot.)
d. Softly insert the paper into the slot,then the scanning will start automatically.
e. Press the button to enter into USB mode, then you can view the scanned
fi les on your computer screen.
Explanation of the status icons
Indicator Setting
1## Year
2## Month
3## Day
Indicator Setting
4## Hour
5## Minute
Part Function
1 1) For scanner without docking: Press and hold this key for 3 seconds to turn power on or off .
In power on mode, press this button to start scanning, press this button again to stop.
2) For scanner with docking: Press and hold this key for 3 seconds to turn power on or off .
In power on mode, scanning will start automatically when the scanning document is detected.
2 Color/Mono Select Color/Mono scan, Color/Mono mode icon will be displayed on status LCD
3 Format button Press this button to format the micro SD card.
4 LCD screen Scanning status display
5 Scan/Error LED indicator The Green LED indicates normal scanning, Red LED indicates abnormal scanning/overspeed.
6 Charge LED indicator When the Red LED keeps on, it indicates the battery is charging.
When the Red LED goes out, it indicates the battery has been fully charged.
7 DPI Low resolution
Middle resolution
High resolution 300dpi
600dpi
900dpi (w/o docking)
1200dpi (w/ docking)
High/ Medium /Low resolution mode icon will be displayed on status LCD
8 JPEG/PDF Select JPEG/PDF scan, JPEG/PDF mode icon will be displayed on status LCD
9 USB interface Connect to a computer via USB cable provided to view and transfer fi les
10 Time Set Press to enter Time setting mode
11 Reset Press to reset the scanner (Hardware reset)
12 MicroSD card slot The micro SD card storage location
13 Fixed button Slide to put the scanner on the docking or take it out of the docking
14 Width controller Adjust to scan documents of diff erent sizes
Using the scanner
Turn on/off the scanner
Turn on/off the scanner by pressing the button for 3 seconds.
Note: The scanner will power off automatically if no scanning action is detected
within 3 minutes.
Inserting a micro SD memory card (not included)
You must insert a micro SD Card (not supplied) to record and store your pictures.
Inserting the micro SD memory card:
1. Turn OFF the scanner.
2. Insert the micro SD card into the micro SD card slot, and gently press in until
the card is latched.
Note:
1. Do not force the card into the slot;
forcing may damage both the scan-
ner and the micro SD memory card.
Align the micro SD card position (as
marked) and try again
2. The micro SD memory card must be
formatted before scanning. See the
following instructions.
Item Function Description
1 File Format JPEG/PDF
2 SD card indicator pliki zostaną zapisane na karcie microSD
3 Battery indicator Battery is full Empty battery
4 Scan Color COLOR/MONO
5 Counting
Indicator Shows scanned fi les in the microSD card
6 Scan resolution HI:900dpi (w/o docking)/1200dpi (w/docking)
MI:600dpi LO:300dpi
Key features
¯ Color/ Mono JPEG/PDF scan selection
¯ High/Medium/Low dpi scan selection
¯ Directly save JPEG/PDF fi les to the micro SD card
¯ Support the micro SD&SDHC card up to 32GB
¯ Windows 7 / Vista / XP and Mac OS10.4 or above (directly plug-in, driver in-
stallation not required)
Functional parts
How to scan
For scanner without docking:
a. Turn on scanner by pressing the
button for 3 seconds.
b. Hold the document fi rmly with one hand on a fl at surface.
c. Place the scanner on the edge of the paper to ensure the whole document
can be scanned. Make sure to keep the scanning area in between the scanning
width indicators marked on the side of the scanner.
d. Hold the scanner fl at against the material and then press the button once.
e. Slide the scanner slowly, keeping your hand stable to get the best quality picture.
f. Press the button again to stop scanning.