Media-Tech CORSAIR II User Manual

Corsair ii, Vibration force gamepad, User’s guide

Advertising
background image

¯ If your system doesn’t launch the installation

software automatically, please fi nd the auto ex-
ecute fi le “setup.exe”, which is located under the
directory of your CD drive and click on it, then
follow the on-screen instruction to install the
CORSAIR II MT1507.

¯ Upon completing software installation, restart

your PC.

Hardware Installation

¯ Plug-in your CORSAIR II MT1507 connector to ei-

ther one USB Port or USB Hub of your computer
and make sure it is fi rmly connected.

¯ After the CORSAIR II MT1507 is connected, the

monitor will shows “Find a new hardware” and
the standard USB driver will be located for you
to fi nish the easy installation and play games im-
mediately.

¯ The system will add an item of stick in the game-

controller board automatically, and you can test
the function of gamepad buttons and vibration.

Troubleshoting

CORSAIR II MT1507 is properly plugged into the
USB port but does not work.
1. Please remove CORSAIR II MT1507 and all other

game drivers from the system and install soft-
ware drive once again. Sometimes there is a con-
fl ict between foreign drivers.

If you plug CORSAIR II MT1507 in to passive

USB hub and CORSAIR II MT1507 does not work
please plug in to active USB hub or direct USB
port in your computer.

2. Not every game requires all functioning buttons

(12 buttons) on your CORSAIR II MT1507. If you
fi nd some buttons no working inside the game,
please check the game setting again.

3. The function of the gamepad buttons may

vary in diff erent games. Before proceed with
game setting, whatever through the CORSAIR
II MT1507 or from the OPTION inside the game,
always read your game manual carefully to ap-
proach the best game setting.

4. Gamepad buttons confi guration depends from

game type. Please read game manual for game
devices support.

Introduction

Thank you for choosing the CORSAIR II MT1507
Gamepad. This device is an advanced game con-
trol system designed with full ergonomics and
equipped with well-positioned buttons to ensure
your game play comfortably. Moreover it is built
with two motors for actual vibration while playing
games.

In order to fi t your game play, please take a moment
to read the user’s guide. This user’s guide provides
you the necessary information for easily installing
and basic operating this powerful gamepad under
Microsoft Windows XP, Vista and Windows 7.

Package Contents

Your package comes with the following items:
¯ CORSAIR II MT1507 gamepad
¯ Software disc
¯ User’s guide

System Requirements

¯ IBM PC 586/PentiumII compatibles or higher
¯ Available USB port or extension active USB hub
¯ CD-ROM drive
¯ Microsoft Windows XP/Vista/Win 7

Installation

Attention: Always install the software fi rst be-
fore hardware installation.

Software Installation

Disc which comes together witch CORSAIR II
MT1507 contains the software needed for your
device setup. However, if you don’t install this
driver, CORSAIR II MT1507 will be operated
without vibration function.
¯ Insert driver CD disc into your CD-ROM drive and

wait for a few seconds for your computer to load
the disc.

¯ If your system is setup to automatically read a

new inserted CD, then the auto run program is
executed and the opening screen for installation
appears. Please follow the on-screen instruction
to install the drivers step-by-step.

EN

CORSAIR II

User’s Guide

Vibration Force Gamepad

MT1507

Advertising