Canon 550 EX - Manual (Page 72)

2. Wireless Manual Flash With Varied Flash Output
You can set a different flash output for each slave unit (A, B, and C) as
follows.
On the master unit, press the
<
> button and select M.
Press the < > button and
select .
• Pressing the < > button changes
the selection in the following loop:
Press the < > button to select
ON A:B or A:B:C
• ON A:B or A:B:C will blink.
Press the < > button.
• A and the flash output display will blink.
72
Press the < > or < > button to set
the flash output for A.
Press the < > button.
• B and the flash output display will blink.
1
2
3
4
5
6
Flash output
(Off )
05. F073-E (51~) 02.4.1 2:12 PM Page 72