C2G 13138 TC-NT1 Network Cable Tester - Manual (Page 2)

INTRODUCTION
The TC-NT1 Network Cable Tester is an innovative, practical tester that
can easily read the correct pin configuration of 10BASE-T, 10BASE-2,
RJ45/RJ11 modular, 258A, TIA-568A/568B and Token Ring cables by
comparing one transmitting end to the corresponding receiving end.
The included remote terminator allows the user to test installed cable
either at a wall jack or a patch panel. Verifying continuity and testing
for faults such as open, shorted and crossed pairs has never been
easier and more affordable.
FEATURES
* Displays the actual pin configuration of 10BASE-T and 10BASE-2
Ethernet, RJ45/RJ11 modular, 258A, TIA-568A/568B and Token Ring
cables
* Provides easy to read continuity and fault status display
* Checks for continuity, open wire, shorted pair and crossed pair faults
* Allows for remote testing of installed cables from wall jack or patch
panel
* Tests shield wire integrity
* Auto or manual scanning
1
Ethernet
10Base-T
EIA/TIA-568A
PR1
PR2
8-position
Token Ring
EIA/TIA-568B
AT & T258A USOC 4(Prs. 1&2)
USOC 6(Prs. 1,2&3)
PR3
PR2
Pr1 PR1
PR2
PR3 PR4
PR1
PR2
PR3 PR4
PR4
PR2
PR1
PR3
USOC 8
PR3
PR4
(Diagram 1)
BNC
Plug
PACKAGE CONTENTS
1. TC-NT1 Master Unit
2. TC-NT1 Remote Unit
3. RJ45 Male to BNC Male Adapter Cable (Qty. 2)
4. RJ45 UTP Patch Cable
5. BNC Female/Female Coupler
6. RJ45/RJ11 Jack Size Adapter (Qty. 2)