Displaying media over dlna – Acer K135 User Manual
Page 10
Advertising
10
Displaying Media over DLNA
1.
On the projector/monitor/TV, go to the DLNA screen by using that
device’s remote control, or by briefly pressing the WPS button twice on the
MWA2.
2. Open Wi-Fi on your computer or other device.
3. Connect it to the MWA2 (Acer_MWA2_XXXX).
4. Open the DLNA-supporting Software on your computer or other device.
5. Ensure both media source device and the dongle are connected to the
same AP or physical network.
6. Ensure that the renderer is set as the MWA2 (Acer_MWA2_XXXX).
7. Start playing media on your computer or other device.
Advertising