Choosing between modes – Acer K135 User Manual
Page 17
Advertising
17
Choosing between Modes
You can select between
AP Mode or Client Mode.
•
AP Mode makes the MWA2 Wireless Adapter an Access Point that your
mobile device can connect to directly.
•
Client Mode requires that the MWA2 Wireless Adapter connect to another
Access Point (which your mobile device should also connect to in order to
communicate with the MWA2 Wireless Adapter).
To change the Wi-Fi mode, switch
Client Mode (right hand column) ON or
OFF. When OFF, AP Mode is activated. When ON, Client Mode is activated.
Although the ON and OFF options are next to each other, you need to use
your control’s up/down keys to select between them. See “Navigating the
Advertising