Bell & Gossett P86074A Booster Pumps User Manual

Booster pumps, Installation, operation, & service instructions, Bell & gossett

Advertising
background image

Bell & Gossett

P

L

Booster Pumps

Installation, Operation, & Service Instructions

INSTRUCTION MANUAL

P86074

REVISION A

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.

NOTE: Bell & Gossett recommends Bronze Booster Pumps

be used for pumping potable water

SAFETY

INSTRUCTIONS

This safety alert symbol will be used in this manual and on the

pump safety instructions decal to draw attention to safety

related instructions. When used, the safety alert symbol

means ATTENTION! BECOME ALERT! YOUR SAFETY IS

INVOLVED! FAILURE TO FOLLOW THE INSTRUCTIONS MAY

RESULT IN A SAFETY HAZARD.

Your Series PL-VS

Booster Pump should have the warning/

caution label (Fig. 1) displayed on the pump conduit box. If

this warning and caution is missing or illegible, contact your

local Bell & Gossett Representative for a replacement.

DESCRIPTION

The Series PL-VS

pumps feature permanently lubricated

bearings, a range of available hydraulic performance levels,

115V single phase power input, 4-20 mA or (switchable)

0-10VDC control input, a relay for external fault detection,

manual speed override and built in diagnostic indicator.

PUMP APPLICATION

The Series PL-VS

Booster Pump may be used for water

circulating applications in hydronic heating, solar systems and

chilled water systems. The speed of the pump can be adjusted

manually or by a 4-20 mA or 0-10VDC control input.

OPERATIONAL LIMITS

These pumps are designed to pump liquids compatible

with their iron or bronze body construction.
Maximum Working Pressure:

150 psi (10 bar)

Maximum Operating Temperature: 225°F (107°C)

Electrical Rating:

115V, 60 Hz, 1PH

Do not exceed these values.

WARNING

BEFORE INSTALLING, USING

OR SERVICING THIS PRO-

DUCT, READ THE INSTRUC-

TIONS. TO REDUCE RISK

OF ELECTRICAL SHOCK

SEE INSTRUCTIONS FOR

PROPER INSTALLATION.

CAUTION

FOR SUPPLY CONNECTIONS
USE WIRE SUITABLE FOR AT
LEAST 90°C. USE COPPER
CONDUCTORS ONLY.
EMPLOYER DES FILS
D’ALIMENTATION ADEQUATS
POUR 90°C. FOR INDOOR USE
ONLY. EMPLOYER UNIQUE -
MENT A L’INTERIEUR.

FIG. 1

P48405

TM

Bell & Gossett

UL

®

C US

LISTED

Advertising