Bell & Gossett V1000187C Circuit Setter Plus Calibrated Balance Valves – Lead-Free - Manual

Circuit Setter ® Plus Calibrated Balance Valves
CSA Certified: AB1953; Vermont S152; Maryland House Bill 372 (Statute 12-605)
NSF/ANSI-372
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
NOTE:
SAFETY INSTRUCTION: This safety alert symbol will be used in this manual to draw attention to safety related
instructions. When used, the safety alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS
INVOLVED! FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN A SAFETY HAZARD.
Safety Message Level
DANGER:
WARNING:
CAUTION:
ELECTRICAL HAZARD:
NOTICE:
Indication
A hazardous situation, which if not avoided, will result in death or serious injury.
A hazardous situation, which if not avoided, will result in death or serious injury.
A hazardous situation, which if not avoided, will result in major or minor injury.
The possibility of electrical risks if instructions are not followed in a proper
manor.
• A hazardous situation, which if not avoided, will result in an indescribable
result or state.
• A practice not related to personal injury.
1/2” to 2” Sweat size 1/2” to 3” NPT size
Bell & Gossett recommends Lead Free Brass or Stainless Steel Booster Pumps be used for pumping potable water.
INSTRUCTION MANUAL
V1000187C