Extron Electronics MLC IR_RS-232 Projector Control Cable User Manual
Extron Electronics Accessories communication
68-1537-01 Rev.
A
03 08
MLC IR/RS-232 Projector Control Cable Assembly Guide
9-Pin D Female
Pin Wire
RS-232
Color
Function
1
2 white transmit (Tx)
3 violet receive (Rx)
4
5
bare ground (Gnd)
6
7
8
9
black
ground
red IR signal
The Extron MLC IR/RS-232 cable assembly is used to send
IR or RS-232 commands to a projector from a MediaLink
®
Controller. The assembly consists of unterminated, dual
22 AWG shielded twisted pairs to a 9-pin D female
connector for RS-232 projector control, with a drain wire
for a captive screw connector and a 22 AWG pigtail for
use with an IR Emitter.
Part Numbers
This guide covers the cable
assembly series with part
numbers 26-621-xx. Contact
an Extron representative for
details on available lengths.
White
Violet
Drain
Black
Red
Black
Red
IR Signal
Ground
5
1
6
9
Female
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
www.extron.com