Extron Electronics System 5 IP Series Setup Guide User Manual

System 5 ip series, Setup guide, Setup guide checklist

Advertising
background image

© 2007 Extron Electronics. All rights reserved.

Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517

Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050

Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664

Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX +81.3.3511.7656

www.extron.com

Setup Guide

Setup Guide Checklist

Download and install the latest version of

Global

Confi gurator (see chapter 1).

Download the latest drivers to be used in the project

using the Driver Subscription feature (see chapter 3).

Reference the "IP Link Device Interface Communication

Sheet" (click the Comm Sheet button) for any special

setup requirements (see chapter 3, “Adding a serial driver”).

Obtain device and email IP settings from the network

administrator.

Power the System 5 IP using the included IEC power cord

(see chapter 2).

Connect the System 5 IP to the PC via Ethernet patch or

crossover cable (see chapter 2).

Confi gure the System 5 IP using Global Confi gurator

(see chapter 3).

1.

Create a new Global Confi gurator project.

2.

Select the model of the System 5 IP and set its

IP address.

3.

Defi ne the GlobalViewer Tree location and add the

System 5 IP to the project.

4.

Defi ne email IP settings, notifi cations and contacts.

5.

Add serial and IR drivers.

6.

Confi gure the front panel buttons.

7.

Confi gure the control module buttons.

8.

Create a display shutdown schedule.

9.

Create a display lamp hours warning email.

10.

Create a display disconnect warning email.

11.

Build and upload the confi guration.

12.

Access GlobalViewer

®

.

Cable peripheral devices to ports on the System 5 IP. Test

and troubleshoot the setup if necessary (see chapter 2).

Mount the System 5 IP into a rack or place on furniture

(Refer to the System 5 IP Series User’s Manual, chapter 2).

System Switchers

68-1228-01 Rev. B

01 07

System 5 IP Series

Advertising