Flash exposure compensation – Canon EOS D30 User Manual
Flash Exposure Compensation
The EOS D30 camera can adjust the level of the built-in flash or any EX-series Speedlite. The
compensation amount can be up to ±2 stops in 1/2-stop increments. You cannot use flash
exposure compensation in the Easy Shooting zone.
Set the exposure compensation
Set the Quick Control Dial Switch to
Look at the LCD panel as you turn the
The [+] side indicates positive compensation,
and the [-] side indicates negative
Once set, the exposure compensation
amount remains in memory after the Main
Switch is set to
To cancel, set the compensation amount to
You can set the camera to adjust exposure compensation in 1/3-stop increments.
You can also disable the Auto reduction of fill flash function. (C.Fn-10→126)
The flash Exposure compensation function also operates when you use an EX-series
Speedlite. If the camera and EX-series Speedlite are both set for exposure
compensation, the EX-series Speedlite setting has priority and the camera setting
does not function.
Using the Built-in Flash